|
Description Standards |
Top Previous Next |
|
The Description delimiter shall be the comma-space “, ” string. For fields that do not consist of a value (i.e. empty fields), “--” shall be used. Each of the 12 CIP tables has a default Description standard. Default Description standards and examples are provided below. Capacitors: CAP, <Dielectric Type>, <Package Type>, <Value>, <Tolerance>, <Rated Voltage>, <Package Size> Example: CAP, Ceramic, SMD, 6800 pF, 10 %, 10 V, 0201 Connectors: CONN, <Device Type>, <Value>, <Number of Pins>, <Package Type> Example: CONN, Header, 15-24-7240, 24, TH Crystals and Oscillators: <Device Type>, <Package Type>, <Value>, <Frequency Tolerance> Example: OSC, SMD, 13.5 MHz, +/- 100ppm Diodes: DIO, <Device Type>, <Value>, <Rated Current>, <Rated Voltage>, <Rated Power>, <Package Size> Example: DIO, Zener, BZT52C3V3, --, 3.3 V, 500 mW, SOD-123 ICs: IC, <Device Type>, <Function>, <Value>, <Package Size> Example: IC, Memory Devices, PROM, XC18V01, SOIC-20 Inductors: <Device Type>, <Value>, <Tolerance>, <Rated Current>, <Package Size> Example: Inductor, 220 nH, 5.0 %, 0.3 A, 0603 Ferrite Bead, 120 Ohm, 25 %, 0.2 A, 0603 Misc: MISC, <Device Type>, <Value>, <Package Type>, <Package Size> Example: MISC, Testpoint, 5000 Red, TH, 2.5x2.5x4.6 mm Relays: RELAY, <Value>, <Coil Resistance>, <Coil Voltage Maximum>, <Contact Current>, <Package Type> Example: Relay, G5LA-14, 69 Ohm, 5 VDC, 5 A, TH Resistors: RES, <Material>, <Value>, <Tolerance>, <Rated Power>, <Package Type>, <Package Size> Example: RES, Thick Film, 240 kOhm, 5.0 %, 1/16 W, SMD, 0402 Switches: SW, <Switch Type>, <Value>, <Switch Configuration>, <Number of Pins>, < Package Type> Example: SW, Light Touch, EVQPH, SPST, 4, SMD Transformers: XFMR, <Value>, <Primary Voltage>, <Secondary Voltage>, <Frequency>, <Package Type> Example: XMFR, 3FS-310, 115 V, 5/10 V, 50/60 Hz, TH Transistors: XSTR, <Device Type>, <Polarity>, <Value>, <Rated Voltage>, <Rated Current>, <Package Type> Example: XSTR, BJT, NPN, KSH29C, 100 V, 1.0 A, SMD |